Hikvision DS-3E1506P-EI – Managed 4-Poorts Gigabit Smart PoE Switch voor IP-camera’s

Hikvision DS-3E1506P-EI managed 4-poorts Gigabit PoE-switch voor IP-camera’s

voorraad: Op voorraad
Merk: Hikvision
EAN: 6942160450070

0 beoordelingen - Schrijf een beoordeling

Aantal

In winkelwagen

Verlanglijstje Vergelijken

General
ShellMetal material
Net Weight0.27 kg (0.6 lb)
Gross Weight0.77 kg (1.7 lb)
Dimensions (W × H × D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Power Supply54VDC, 1.2A
Installation ModeDesk-Mounted,Wall-Mounted
Max. Power Consumption65 W
Power Consumption in Idle1.6 W
Surge Protection6 KV

Network Parameters
Ports4 × Gigabit PoE port,2 × Gigabit RJ45 port
MAC Address Table2 K
Switching Capacity14 Gbps
Packet Forwarding Rate10.42 Mpps
Internal Cache1 Mbits

PoE Power Supply
PoE StandardIEEE 802.3af,IEEE 802.3at
PoE Power PinEnd-span: 1/2(-), 3/6(+)
PoE PortPoE: Ports 1 to 4
Max. Port Power30 W
PoE Power Budget60 W

Software Function
Long Range
Ports 1 to 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 2 aggregation groups.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.
VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.

Approval
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)
ChemistryReach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU)

Hikvision DS-3E1506P-EI – Managed 4-poorts Gigabit Smart PoE-switch voor professionele IP-netwerken

De Hikvision DS-3E1506P-EI is een managed 4-poorts Gigabit Smart PoE-switch, speciaal ontwikkeld voor professionele IP-beveiligingsoplossingen. Deze compacte switch biedt hoge prestaties, intelligente PoE-beheerfuncties en volledige controle over jouw netwerk – ideaal voor installateurs die betrouwbaarheid en flexibiliteit eisen.

Voorzien van 4 Gigabit PoE-poorten en 2 Gigabit uplink-poorten, maakt deze switch het eenvoudig om meerdere IP-camera’s, access points of andere netwerkapparaten aan te sluiten én van stroom te voorzien via één kabel. De switch ondersteunt IEEE 802.3af/at met een totaal PoE-budget van 60W (max. 30W per poort).

Wat deze switch onderscheidt, is de Smart Managed Functionaliteit. Via een gebruiksvriendelijke webinterface beheer je eenvoudig VLAN’s, PoE-instellingen, bandbreedtebeheer en PoE Watchdog – die automatisch vastgelopen camera’s herstart zonder tussenkomst van een monteur.

Belangrijkste kenmerken:

4× Gigabit PoE-poorten + 2× Gigabit uplink-poorten
Ondersteunt IEEE 802.3af/at (max. 30W per poort)
Totaal PoE-budget: 60W
Managed switch met intuïtieve webinterface
Smart functies: VLAN, QoS, PoE Watchdog, storm control
6kV overspanningsbeveiliging
Robuust metalen design, geschikt voor wand- of desktopmontage

De DS-3E1506P-EI is dé oplossing voor wie een stabiel, veilig en beheersbaar netwerk nodig heeft voor IP-camera’s of andere kritieke netwerkapparatuur. Compact van formaat, maar groots in prestaties en betrouwbaarheid.

General
ShellMetal material
Net Weight0.27 kg (0.6 lb)
Gross Weight0.77 kg (1.7 lb)
Dimensions (W × H × D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Power Supply54VDC, 1.2A
Installation ModeDesk-Mounted,Wall-Mounted
Max. Power Consumption65 W
Power Consumption in Idle1.6 W
Surge Protection6 KV

Network Parameters
Ports4 × Gigabit PoE port,2 × Gigabit RJ45 port
MAC Address Table2 K
Switching Capacity14 Gbps
Packet Forwarding Rate10.42 Mpps
Internal Cache1 Mbits

PoE Power Supply
PoE StandardIEEE 802.3af,IEEE 802.3at
PoE Power PinEnd-span: 1/2(-), 3/6(+)
PoE PortPoE: Ports 1 to 4
Max. Port Power30 W
PoE Power Budget60 W

Software Function
Long Range
Ports 1 to 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 2 aggregation groups.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.
VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.

Approval
EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)
ChemistryReach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU)