TSW114

ETH

• 5 x ETH ports, 10/100/1000 Mbps, supports automatic MDI/MDIX crossover
• IEEE 802.3 series standards:
  802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

Performance Specifications

• Bandwidth (Non-blocking): 10 Gbps
• Packet buffer: 128 KB
• MAC address table size: 2K entries
• Jumbo frame support: 9216 bytes

Power

• Connector: 2-pin industrial DC power connector
• Input voltage range: 9 - 30 VDC
• PoE (passive): Ability to boot via ETH1 ports, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
• Power consumption:
  Idle: 0.3 W / Max: 2.3 W

Physical Interfaces

• Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
• Status LEDs: 1 x Power LED, 10 x ETH status LEDs
• Power: 1 x 2-pin industrial DC power connector
• Other: 1 x Grounding screw

Physical Specifications

• Housing material: Anodized aluminum housing and panels
• Dimensions (W x H x D): 113.1 x 27.4 x 80.5 mm
• Weight: 174 g
• Mounting options: Integrated DIN rail bracket, wall mounting, flat surface (additional kit required)

Environmental specifications

• Operating temperature: -40 °C to 75 °C
• Operating humidity: 5% to 95% non-condensing
• Input protection rating: IP30

Regulatory and type approvals

• Regulations: CE, UKCA, FCC, IC, CB, RCM, CITC, REACH, RoHS, WEEE

EMC emissions and immunity

• Standards:
  EN 55032:2015 + A11:2020 + A1:2020
  EN 55035:2017 + A11:2020
  ESD: EN 61000-4-2:2009
  Radiation immunity: EN IEC 61000-4-3:2020
  EFT: EN 61000-4-4:2012
  Overvoltage immunity (AC mains): EN 61000-4-5:2014 + A1:2017
  CS: EN 61000-4-6:2014

Safety

• Standards:
  CE: EN IEC 62368-1:2020 + A11:2020
  RCM: AS/NZS 62368.1:2022
  CB: IEC 62368-1:2018